IBC Services
Skip navigation-
About TD Coating
-
-
Nitriding in pulse glowing discharge (Plasma Nitriding) is an efficient method to increase hardness and wear-resistance of metals and alloys. The basic technological advantage of this method is the low temperature at which the process is conducted (800-1200°F) resulting in very small dimensional deformations and distortions.
ION Plasma Nitriding DHIN Affordable Low Cost -
-
-
SECO/WARWICK 12 Bar Universal HPQ™ (High Pressure Quench) vacuum furnace with Low Pressure Vacuum Carburizing for hardening and carburizing bearing steel and aerospace components. The furnace has a hot zone of 24'' x 24'' x 36'' (600 x 600 x 900 mm) and a maximum temperature rating of 2400°F (1350°C) and 1500 pound (750 kilogram) gross loading capacity. The Universal HPQ provides advanced diffusion surface treatment with a fully automated power management control system that allows process flexibility with the lowest cost of operation.
-
-
-
Vacuum carburizing using methane (CH4) as the carburizing gas was developed in the United States in the 1960s and is now used worldwide. Carburizing technology based on methane requires higher temperatures and pressures up to 500 mbar (375 torr).
-
-
-
The performance of our PVD coatings deposited using our proprietary High Energy PVD process – HI3D™ – is superior to many other commercially available coatings in most demanding heavy-duty applications.
-
-
Our arc plasma technology vaporizes a refractory metal or alloy (Titanium, Chromium, Titanium/Aluminum, Zirconium, etc) from a cathode plate. The metal particles are ionized 90-100% vs. 10-50% in competitive systems, doubling coating process productivity and performance of coating.
-
-
-
-
-
Al2O3 Coating on the polished Ti-6Al-4V disks, 16mm diameter, was carried out by HVLTS (High Voltage Low Temperature Sputtering)
-
-
-
Y2O3 coating on inner surface of quartz tube OD=25.4mm, ID=22mm.
-
-
-
-
Boriding DHB
-
-
-
-
-
-
-
IBC is using the latest state of the art laser welding process that makes it possible to repair precision components of all types of mold and tool steel, aluminum alloys, copper-beryllium, copper-zinc, titanium, and others.
-
-
Microplasma Oxidation